Sehr freundliche und hilfreiche Kontaktaufnahme. Ich hatte ein Klingelschild bestellt, was sich so wie ich es mir dachte, nicht gut gedruckt hätte werden können. Der Kundenservice nahm Kontakt mit mir auf und gemeinsam fanden wir eine super Lösung. Ich bin sehr zufrieden.
Self-adhesive laser-engraved letterbox name plate
Laser-engraved right into the material – a self-adhesive letterbox sign or slide-in name plate, UV-resistant and fitted in seconds without drilling.
For another sign, simply design again.
Text, font and size · with previewPay without filling in a form — the delivery address comes from your PayPal or Amazon account.
By buying, you accept our terms and conditions (in German) and confirm that you have read the withdrawal policy and the privacy policy.
Made for you — so no right of withdrawal.
Not sure which to choose? With a Bütic gift voucher you can never get it wrong.The doorbell rings, and the delivery driver is standing at a row of bells with no names. A paper note is stuck to your bell, and it goes wavy in the first rain. With a self-adhesive engraved doorbell sign, your name is shown clearly and for good on your bell and letterbox.
What changes for you
- Your visitors and delivery drivers find you at first glance. Your name is laser-engraved into the sign.
- You can put up the name sign in seconds, with no drilling at all. On the back there is a strong 3M adhesive film.
- You design it to match your front door and doorbell panel. You choose the colour, size, font and up to three lines in the sign designer with preview.
Material & finish
The sign is made of 1.6 mm thick acrylic-based laminate. It is UV-resistant and made for indoor and outdoor use. The laser removes the top colour layer to reveal the text colour underneath. This means the lettering can neither peel off nor fade. Every sign is made in our own production in Pößneck.
Dimensions & technical details
- Material: acrylic-based laminate, UV-resistant
- Material thickness: 1.6 mm
- Dimensions: 50 × 15, 55 × 15, 60 × 15, 50 × 20, 55 × 20, 60 × 20, 70 × 20 and 70 × 25 mm (width × height)
- Colours: 29 colour pairs to choose from (see pictures)
- Fonts: 46 to choose from, with a preview in the sign designer
- Lettering: laser engraving with up to three lines of text (three from a sign height of 20 mm), centred
- Fixing: strong 3M adhesive film on the back, no drilling needed. On request with two or four holes for screwing on
- Alternative use: can be used as a slide-in name plate (do not remove the protective film)
- Suitable for: indoor and outdoor use
- Production: our own production in Pößneck
How to use your doorbell name plate
- On the doorbell panel: peel off the protective film and press the sign on. From now on, every guest knows they are at the right door before they ring.
- On the letterbox: your name is easy to read next to the slot. Your post reaches you instead of your neighbour.
- In a practice, office or block of flats: matching signs on the entrance, letterbox and bell look tidy.
- Our tip for tenants: Leave the protective film on the adhesive side. Then you can slide the sign into an existing holder and swap it at any time.
Care & durability
There is not much you need to do. To clean it, a soft, damp cloth is all it takes.
Options & what's included
- 8 sizes, 29 colour pairs and 46 fonts to combine as you like
- Engraved with your own text, up to three lines (three from a sign height of 20 mm)
- On request two or four holes for screwing on, Ø 2 to 5 mm
- Supplied with 3M adhesive film on the back, ready to stick on or to use as a slide-in sign
Frequently asked questions
Does the doorbell sign fit every holder? The sign is 1.6 mm thick. Some slide-in slots are only made for thin paper labels. It is best to measure your old sign and check the depth of the slot.
Is it suitable for illuminated name panels? No. The laminate does not let light through.
Can I stick it on in winter? Below about 10 °C the adhesive film does not stick well. Put the sign up on a mild day.
Choose your size and colour, then design your text in the sign designer with preview.
More in our guide
Goes well with
Matching categories
- Material: acrylic-based laminate, UV-resistant
- Material thickness: 1.6 mm
- Dimensions: 50 × 15, 55 × 15, 60 × 15, 50 × 20, 55 × 20, 60 × 20, 70 × 20 and 70 × 25 mm (width × height)
- Colours: 29 colour pairs to choose from (see pictures)
- Fonts: 46 to choose from, with a preview in the sign designer
- Lettering: laser engraving with up to three lines of text (three from a sign height of 20 mm), centred
- Fixing: strong 3M adhesive film on the back, no drilling needed. On request with two or four holes for screwing on
- Alternative use: can be used as a slide-in name plate (do not remove the protective film)
- Use: indoors and outdoors
- Production: our own production in Pößneck
Manufacturer information under the EU General Product Safety Regulation (GPSR):
You can review items you have bought from us: signed in to your customer account or via the link in your order confirmation.
Sign inHow our reviews come about: Only people who bought the item from us can review it — directly in your order via the link in the order confirmation, even without a customer account, or signed in to your account. We check the purchase automatically against the order; these reviews carry the label “Verified purchase”. Reviews with 4 stars or more appear immediately; we take a quick look at all others before publishing — every genuine review is published, critical ones included. We only remove spam, insults and unlawful content. Reviews up to August 2026 were carried over from our previous shop system.
super gelaufen
Passt ganz genau , super Schriftart . Danke
Not sure about a variant, availability or a detail? Write to us — we’ll get back to you personally.
Frequently bought together
Recently viewed
Your legal guarantee rights
More about your rights: europa.eu/youreurope/guarantees Tap the notice to enlarge it or open it as a PDF.
