Metal spring clip – 7 colours, 70 mm or 110 mm

The petition list at the market stall, the job sheet in the workshop, the colouring page on a child's desk: whenever paper needs holding in place, you need a clip that grips reliably. That is exactly what this metal spring clip is made for. It holds paper and card securely in place and stops them slipping. It is just right for your next clipboard project. With seven colours to choose from, you will find the shade that suits your board.

What changes for you

• Your sheets stay put, even when you're writing on the go – because the serrated clamping edge reliably holds a stack of approx. 10 to 12 mm.
• You can style your clipboards your way – with seven colours ranging from gold and rose gold to rainbow.
• Your home-made or refurbished board is ready to use in no time – simply attach the clip using the two rivet holes.
• You order exactly the quantity you need – a single clip for that one special board, or a set of 10, 25, 50 or 100 for bigger projects.
• You've got the right size for narrow and wide boards – choose between 70 mm and 110 mm wide.

Why this spring clip makes a difference every day

A clipboard is only as good as its clip. If the clip holds firmly, you can write standing up, tick off lists or take orders without the paper slipping away. And because the spring clip comes in seven finishes, you can match it to your shop counter or your desk at home.

Material & finish

The spring clip is made of metal with a base plate approx. 0.3 mm thick. This keeps it flat and still stable in everyday use. The careful finishing shows in the even edges. The lever opens and closes without catching. The serrated clamping edge grips the paper securely, so you don't need to punch any holes.

Dimensions & technical details

• Material: metal
• Type: spring clip (also known as a clipboard clip or board clip)
• Colours: gold, silver, rose gold, black, antique finish, rainbow, brushed copper
• Width 70 mm, rivet hole spacing 61 mm
• Width 110 mm, rivet hole spacing 100 mm
• Width of serrated edge: approx. 90 mm
• Height incl. lever: approx. 20 mm
• Rivet hole diameter: 4 mm
• Base plate thickness: approx. 0.3 mm
• Capacity: approx. 10–12 mm

How to use the spring clip

• Building your own clipboard: attach the clip using the two rivet holes – and your wooden or plastic board is ready to use in just a few minutes.
• In the café or bakery: the daily menu, order lists or delivery notes clipped firmly at the counter – nothing blows away, everything stays to hand.
• At the weekly market or when catering: checklists and order slips stay in place even outdoors, thanks to the serrated clamping edge.
• At your desk at home: hold notepads, recipes or the children's colouring pages in place – and nothing slips while you write.
• For craft and DIY projects: give old clipboards a new clip in rose gold or antique finish. Your clipboard will look fresh and well cared for again.

Good to know about the spring clip

The secret of this spring clip is its serrated clamping edge: the little teeth grip the paper at many points at once, so even thicker stacks of up to approx. 10 to 12 mm are held securely – no hole punching needed. That's why it has always been the classic clipboard accessory wherever people write standing up and flick through lots of pages.

Options & what's included

• Two widths to choose from: 70 mm (rivet hole spacing 61 mm) or 110 mm (rivet hole spacing 100 mm)
• Seven colours: gold, silver, rose gold, black, antique finish, rainbow, brushed copper
• Available singly or in sets of 10, 25, 50 or 100
• Clipboards and paper shown in the product images are for illustration only and are not included

Frequently asked questions

How is the spring clip attached? The clip is fixed to the board using the two rivet holes. The rivet holes are 4 mm in diameter and spaced 61 mm apart (70 mm version) or 100 mm apart (110 mm version).

How much paper does the clip hold? The serrated clamping edge reliably holds a stack of approx. 10 to 12 mm – so a small pile of paper is no problem.

Which size suits my clipboard? The 70 mm version is ideal for narrow boards, while the 110 mm version with its approx. 90 mm serrated edge suits boards in the usual A4 format.

Can I order larger quantities? Yes, Bütic offers the spring clip individually or in sets of 10, 25, 50 or 100. This is handy for workshops, clubs or restaurants and cafés.

In the end, it's not about a metal clip. It's about that moment when you're writing standing up, the wind sweeps across the market stall – and your paper simply stays where it belongs. Just choose the colour, width and quantity that suit your project.